Antique Circa 1850s – 1860s American Clock Company IRON FRONT Parlor Mantle Clock – See Video. Movement – Time & Strike with gong chime – 8 Day. Dial – Likely Original. Operating condition – I have many clocks to test and limited time to do so – Tested – This clock needed a bit of oiling to get it running, it winds up on both sides fine and i have run it for over 3 days, seems to be a good runner but as said in the video the movement is dirty and has probably never been cleaned in its 160ish years of life and would greatly benefit from a […]

Key to wind clock is present. It is missing the glass. Has a slight bend to one side. 7″ diameter, 4″ deep.

Antique Seth Thomas Quarter Hour Chiming Mantle Clock In Running Condition.

So take a look at pics here at all pics for conditions and size. It’s been running for several days here.. Keeping looks to be good time have not tested for length of time or accuracy here. But is running and doing its thing with the strike gong. This clock is absolutely beautiful! Make a statement for sure! You don’t want to let this beauty pass you by! A great piece of history here. As pictured as seen as shown. A cool old clock. We source some odd boxes but fuel costs are extremely expensive as well.

However we can’t guarantee functionality.

Has the original bob and is tested, it runs great without issue. The clock has run for days straight without stopping, runs like a dream and the chime and gong works great! I winded it near fully and the clock ran flawlessly the entire time until needing a new wind. Hard to find in this condition! Glass on the front is in good shape, has the back cover as well, missing the key. Clock runs and works as it should. The half hour bell and hour gong works and sounds great. This clock strikes on the half hour on a bell, the hours on a cathedral gong. See video for […]

Nice shape but is sprung. See pictures for shape.

Helmsman Brass & Wood Base: E537-007. Brass 24HR Clock with Chime: 1004-001. I dont have the key so I cant test the clock, the Barometer has moved in the past days so I think that is working. The Barometer was a little loose on the base, there are only 2 screws that hold it and the clock to the base. I also found 3 of the 4 screws were short ones, so I would recommend replacing them with a longer one, see last pic. I wiped down the brass lightly with a cloth, mostly to remove the dust. It could use a good polishing, unless you prefer the patina as […]